American-standard Cadet Whirlpool/Bathing Pool 2772.XXXW Manuel d'utilisateur télécharger pdf

INSTALLATION INSTRUCTIONS

752501-100 Rev. J

© American Standard Inc. 2005

All product names listed herein are trademarks

of American Standard Inc. unless otherwise noted.

HIGH GLOSS ACRYLIC

SHOWN LESS ALL FITTINGS

CADET™

5' x 42"

WHIRLPOOL/BATHING POOL

2772.XXXW SERIES

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

THANK YOU...

for selecting an American Standard bath. Your new

bath is shipped to you after careful inspection. The

whirlpool version is completely assembled with pump,

motor, and system piping. All you need to finish the

installation are your selected fittings and electrical

connections for a whirlpool.

To insure maximum performance and pleasure from

this product, please follow the instructions and

cautions.

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor

immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before

enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect

the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump,

motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and

enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead

(required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

List of Optional Components (not included):

• Safe-T-Heater 9075.120*

• Tile Bead Kit 751755-100*

• Apron Kit*

* see your American Standard Distributor

List of Required Components (not included):

• Drain 1583.470* • Bath Filler*

* see your American Standard Distributor

List of Required Tools and Supplies:

Tools

• Level

• Tape Measure

• Pipe Wrench

• Slip Joint Pliers

• Screw Driver

• Standard

Woodworking Tools

• Personal Safety

Equipment

• Caulking Gun

Supplies

• Nails

• Putty

• Caulking (waterproof)

• 1 x 3 or 2 x 2

Stringers

• Drop Cloth

• 15 amp GFI

Outlet

• Cement, Plaster,

Grout

OUTLINE OF CUTOUT

1486mm x 1029mm

(58-1/2 X 40-1/2)

RECOMMENDED FITTING LOCATION

76 X 330mm (3 x 13")

FOR PIER OR ISLAND

INSTALLATIONS ONLY

ALT. FITTING LOCATION

464 mm

(18-1/4)

38 mm

(1-1/2)

502 mm

(19-3/4)

1-1/2 O.D.TAILPIECE

■ LEVELING

STRINGER

NOT FOR

SUPPORT

ROUGH

FLOOR

1524mm

(60)

1067mm

(42)

533mm

(21)

235 mm

(9-1/4)

305 mm

(12)

57 mm

(2-1/4)

(8) JETS

76mm

(3)

CUTOUT IN FLOOR

FOR DRAIN

PUMP

FINISHED

WALL

305mm

(12)

OPTIONAL TO

FINISHED FLOOR

USUALLY BETWEEN

1651 & 1981mm

(65 & 78)

C/L OF

OVERFLOW

102 mm

(4)

C/L OF

SPOUT

C/L OF

VALVES

C/L OF

SHOWER ARM

70 mm

(2-3/4)

117 mm

(4-5/8)

1-1/2 N.P.T.M.

THREADS

19 mm

(3/4)

229 mm

(9)

C/L OF

SUPPLIES

C/L OF DRAIN

SEE FITTING

SPECS FOR

DIMENSIONS

(2) AIR VALVES

ON/OFF

SWITCH

PROVIDE ACCESS TO PUMP FOR

SERVICING ON ALL INSTALLATIONS

INTEGRAL

SUPPORT

FEET

SAFE-T-HEATER

REMOVABLE

BLANK

60 x 42 x 19-3/4 In.(1524 x 1067 x 502mm)

117 Lbs. (53 Kg.)

642 Lbs. (289 Kg.)

63 Gal. 239 L.)

54 Gal. (204 L.)

40 x 26 In. (1016 x 660 mm)

52 x 32-1/2 In. 1321 x 826 mm)

13-1/4 In. (337 mm)

37 Lbs./Sq. Ft. (182 Kgs/Sq. m.)

27.8

45.4

GENERAL SPECIFICATIONS FOR 2772 WHIRLPOOL

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

MIN. OPERATING GAL.

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

3

)

WHIRLPOOL ELECTRICAL SPECIFICATIONS

1.6 HP, 9.7 AMPS, 120V.SYSTEM I PUMP

1 2 3 4

Résumé du contenu

Page 1 - 2772.XXXW SERIES

INSTALLATION INSTRUCTIONS752501-100 Rev. J© American Standard Inc. 2005All product names listed herein are trademarksof American Standard Inc. unless

Page 2 - TYPICAL RECESS INSTALLATION

1486mm(58-1/2)CUTOUTTYPICAL RECESS INSTALLATIONLEVELINGSURFACEWATERPROOF SEALANTBATHWHIRLPOOL ONLY:UNLESS AN ACCESS OPENING OF AT LEAST12" X 24&q

Page 3 - ELECTRICAL DIAGRAM

ELECTRICAL DIAGRAMREAD AND FOLLOW ALL INSTRUCTIONSBLACKWHITE120 VACGND.SEPARATE15 AMP GFCIOUTLETWHIRLPOOL MOUNTEDAIR SWITCH ORWALL TIMER ELECTRICAL IN

Page 4 - SPIC AND SPAN

MotorHi PerformanceRating1.6WIRE SELECTION GUIDE752501-100 Rev. JDRAIN CONNECTION AND SYSTEM TESTUsing recommended drain opening, connect whirlpool dr

Commentaires sur ces manuels

Pas de commentaire