American-standard 2775.XXXW Series Manuel d'utilisateur télécharger pdf

INSTALLATION INSTRUCTIONS

752536-100 Rev. G

© American Standard Inc. 2003

All product names listed herein are trademarks

of American Standard Inc. unless otherwise noted.

HIGH GLOSS ACRYLIC

SHOWN LESS ALL FITTINGS

CADET™ CORNER

WHIRLPOOL

2775.XXXW SERIES

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

THANK YOU...

for selecting an American Standard bath. Your new

bath is shipped to you after careful inspection. The

whirlpool version is completely assembled with pump,

motor, and system piping. All you need to finish the

installation are your selected fittings and electrical

connections for a whirlpool.

To insure maximum performance and pleasure from

this product, please follow the instructions and

cautions.

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor

immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before

enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect

the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump,

motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and

enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead

(required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

List of Optional Components (not included):

• Safe-T-Heater 9075.120*

• Tile Bead Kit 751755-100*

* see your American Standard Dirstributor

List of Required Components (not included):

• Drain* 1583.470 • Bath Filler*

* see your American Standard Dirstributor

List of Required Tools and Supplies:

Tools

• Level

• Tape Measure

• Pipe Wrench

• Slip Joint Pliers

• Screw Driver

• Standard

Woodworking Tools

• Personal Safety

Equipment

• Caulking Gun

Supplies

• Nails

• Putty

• Caulking (waterproof)

• 1 x 3 or 2 x 2

Stringers

• Drop Cloth

• 20 amp GFI

Outlet

• Cement, Plaster,

Grout

1524mm

(60)

70mm REF.

(2-3/4)

165mm

(6-1/2)

279mm

(11)

RECOMMENDED

FITTING LOCATION

64 X 330mm (2-1/2 X 13)

229 X 305mm

(9 X 12)

CUTOUT IN

FLOOR FOR

DRAIN

ON/OFF

SWITCH

PROVIDE ACCESS

TO PUMP FOR

SERVICING ON ALL

INSTALLATIONS

OUTLINE OF

CUTOUT

2159mm

(85)

1080 mm

(42-1/2)

C/L

1524mm

(60)

1076mm

(42-3/8)

1080mm

(42-1/2)

PUMP

C/L OF

DRAIN OUTLET

1-1/2 O.D. TAILPIECE

LEVELING STRINGER

NOT FOR SUPPORT

70mm

(2-3/4)

117mm

(4-5/8)

1-1/2 N.P.T.M.

THREADS

38 mm REF.

(1-1/2)

C/L OF

OVERFLOW

76mm

(3)

464mm

(18-1/4)

502mm

(19-3/4)

ROUGH

FLOOR

INTEGRAL

SUPPORT

FEET

SAFE-T-

HEATER

REMOVABLE

BLANK

85 X 60 X 19-3/4In.(2159 X 1524 X 502mm)

130 Lbs. (59 Kg.)

756 Lbs. (343 Kg.)

75 Gal. (284 L.)

60 Gal. (227 L.)

32 X 32 In. (813 mm X 813 mm)

46 X 46 In. (1168 X 1168mm)

14 In. (356 mm)

34 Lbs./Sq. Ft. (115 Kgs/Sq. m.)

41.7

70.4

GENERAL SPECIFICATIONS FOR 2775 WHIRLPOOL

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

MIN. OPERATING GAL.

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

3

)

WHIRLPOOL ELECTRICAL SPECIFICATIONS

2.1 HP, 14.4 AMPS, 120V.SYSTEM I PUMP

1 2 3 4

Résumé du contenu

Page 1 - 2775.XXXW SERIES

INSTALLATION INSTRUCTIONS752536-100 Rev. G© American Standard Inc. 2003All product names listed herein are trademarksof American Standard Inc. unless

Page 2 - TYPICAL CORNER INSTALLATION

752536-100 Rev. G(2)INSTALLATION AND FRAMING INSTRUCTIONSThe variety of installations possible for this whirlpool may require framing procedures other

Page 3 - ELECTRICAL DIAGRAM

ELECTRICAL DIAGRAMREAD AND FOLLOW ALL INSTRUCTIONSBLACKWHITE120 VACGND.SEPARATE20 AMP GFCIOUTLETWHIRLPOOL MOUNTEDAIR SWITCH ORWALL TIMER ELECTRICAL IN

Page 4 - SPIC AND SPAN

WIRE SELECTION GUIDE752536-100 Rev. GDRAIN CONNECTION AND SYSTEM TESTUsing recommended drain opening, connect whirlpool drain to waste line. Tighten

Commentaires sur ces manuels

Pas de commentaire