American Standard TW001L-OV.011 Guide d'installation télécharger pdf (Page 2)

754916-100

60 x 30 x 18 In.

(1524 x 762 x 457mm)

60 Lbs. (27 Kg)

435 Lbs.(197 Kg)

45 Gal. (170 L)

22.25 x 44.25 In.(565 x 1124mm)

27.75 X 53.125 In.(705 x 1349mm)

11.25 In. (286mm)

35 Lbs./Sq.Ft. (170 Kgs/Sq.m)

27.5

28.4

GENERAL SPECIFICATIONS FOR 2647 TUB

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

)

ROUGH-IN INFORMATION: OVATION TUB

15"

(381mm)

30"

(762mm)

33-3/4"

(857mm)

60"

(1524mm)

3-1/16"

(78mm)

9-1/2"

(241mm)

1-7/8"

(48mm)

C/L of pipe

location from

tub edge

3-13/16"

(97mm)

(76mm)

(25mm)

16-3/4"

(425mm)

11-1/4"

(286mm)

Depth to

Overflow

17"

(432mm)

3-1/2"

(89mm)

INSTALLATION AND FRAMING INSTRUCTIONS:

D.)

16-3/4"

(425mm)

Each alcove

stud must

be plumb

and square.

(711mm)

ILLUSTRATION 1

ILLUSTRATION 2

Install drain components to the bath following the manufacturer's

instructions. See the roughing-in drawing for suggested opening

size and location dimensions.

C.)

With the top of the stringer touching the traced line, attach the

stringer to the studs.

B.)

As shown in ILL. 2, mark the position of the underside of the

deck by tracing a line onto the studs at the height indicated,

using a level or other suitable straight edge.

A.)

Locate studs as required. Ensure roughing-in dimensions are

proper, plumb, and square. It is strongly recommended that an

additional opening be provided for access to the drain components.

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire

American Standard TW001L-OV.011 Guide d'installation Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Non American Standard TW001L-OV.011