American Standard 2908.XXXW Manuel d'utilisateur télécharger pdf

INSTALLATION INSTRUCTIONS

752535-100 Rev. F

© American Standard Inc. 2005

All product names listed herein are trademarks

of American Standard Inc. unless otherwise noted.

HIGH GLOSS ACRYLIC

SHOWN LESS ALL FITTINGS

REMINISCENCE

DROP-IN™

WHIRLPOOL

2908.XXXW SERIES

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

THANK YOU...

for selecting an American Standard bath. Your new

bath is shipped to you after careful inspection. The

whirlpool version is completely assembled with pump,

motor, and system piping. All you need to finish the

installation are your selected fittings and electrical

connections for a whirlpool.

To insure maximum performance and pleasure from

this product, please follow the instructions and

cautions.

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor

immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before

enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect

the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump,

motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and

enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead

(required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

List of Optional Components (not included):

• Safe-T-Heater 9075.120*

* see your American Standard Distributor

List of Required Components (not included):

• Drain 1583.470* • Bath Filler*

* see your American Standard Distributor

List of Required Tools and Supplies:

Tools

• Level

• Tape Measure

• Pipe Wrench

• Slip Joint Pliers

• Screw Driver

• Standard

Woodworking Tools

• Personal Safety

Equipment

• Caulking Gun

Supplies

• Nails

• Putty

• Caulking (waterproof)

• 1 x 3 or 2 x 2

Stringers

• Drop Cloth

• 15 or 20 amp

GFI Outlet

• Cement, Plaster,

Grout

229 x 305mm

(9 X 12)

FLOOR

CUTOUT

1-1/2 N.P.T.M. THREADS

ROUGH

FLOOR

1-1/2 O.D.TAILPIECE

70mm

(2-3/4)

117mm

(4-5/8)

LEVELING STRINGER

(NOT FOR SUPPORT)

RIM AT

DRAIN END

C/L OF OVERFLOW

616mm

(24-1/4)

73mm

(2-7/8)

464mm

(18-1/4)

79mm

(3-1/8)

149mm REF.

(5-7/8)

64mm REF.

(2-1/2)

1676mm

(66)

PUMP

PROVIDE ACCESS

TO PUMP FOR SERVICE

ON ALL INSTALLATIONS

914mm

(36)

457mm

(18)

330mm

(13)

INTEGRAL

FITTING DECK

152mm

(6)

C/L OF

DRAIN

OUTLET

OUTLINE OF

CUTOUT

ON/OFF

SWITCH

INTEGRAL

SUPPORT

FEET

SAFE-T-HEATER

REMOVABLE BLANK

66 x 36 x 24-1/4 In. (1676 x 914 x 616mm)

95 Lbs. (43 Kg.)

659 Lbs. (299 Kg.)

68 Gal. (257 L.)

55 Gal. (208 L.)

40 x 18 In. (1016 x 457mm)

53 x 28 In. (1330 x 718mm)

15 In. (381mm)

40 Lbs./Sq. Ft. (191 Kgs/Sq. m.)

23.8

44.5

GENERAL SPECIFICATIONS FOR 2908 WHIRLPOOL

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

MIN. OPERATING GAL.

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

3

)

WHIRLPOOL ELECTRICAL SPECIFICATIONS

1.6 HP, 9.7 AMPS, 120V.

2.1 HP, 15.6 AMPS, 120V.

SYSTEM I PUMP

SYSTEM II PUMP

1 2 3 4

Résumé du contenu

Page 1 - 2908.XXXW SERIES

INSTALLATION INSTRUCTIONS752535-100 Rev. F© American Standard Inc. 2005All product names listed herein are trademarksof American Standard Inc. unless

Page 2 - ACCESS PANEL

TYPICAL PIER TYPE INSTALLATIONMOUNTING SURFACEWATERPROOF SEALANTBATHUNLESS AN ACCESS OPENING OF AT LEAST12" X 24" (305 X 610MM) IS PROVIDED,

Page 3 - ELECTRICAL DIAGRAM

ELECTRICAL DIAGRAMREAD AND FOLLOW ALL INSTRUCTIONSBLACKWHITE120 VACGND.SEPARATE 15 AMP GFCI OUTLET FOR 1.6 HP MODELSSEPARATE 20 AMP GFCI OUTLET FOR 2.

Page 4 - SPIC AND SPAN

WIRE SELECTION GUIDE752535-100 Rev. FMaximum distance fromfusebox to motorThe sizes shown on thischart are recommendationsfor copper conductorsonly.

Commentaires sur ces manuels

Pas de commentaire