American Standard WALK-IN BATH Manuel du propriétaire télécharger pdf (Page 12)

OWNERS MANUAL

Acrylic Extension Kit Installation

The Acrylic Extension Kit is designed to accommodate all acrylic walk-in tubs to fit within a 60” alcove

pocket. The top panel measures 30” x 20” (depth x width) and the front panel 37 ½” x 20” (height x width).

The panels must be trim to fit the unit within the 60” alcove.

Step 1

 Temporary locate the tub within the alcove walls.

 Level the tub along the deck and apron.

 Measure and record the distance from the tub and apron to the adjacent alcove wall.

Steps 2, 3, & 4

 Mask off and mark the trim lines for the top and front extension panels.

 Using a high speed carbide tooth blade, cut along the trim lines

 Mark a horizontal line that is parallel to the tub’s deck along the back and adjacent wall of the alcove.

 Mark a vertical line that is parallel to tub’s apron on the adjacent wall of the alcove.

 Install three wood stringers approximately 3/8” below the horizontal and vertical lines.

 Verify the fit of the front panel and then the top panel to the alcove opening.

 Shimming may be required to achieve a level fit.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Pas de commentaire

American Standard WALK-IN BATH Manuel du propriétaire Page 12